NX2 Nexus Brochure Multi & server Digital displays Analog displays Autopilot
Transducers & accessories Features Matrix Instrument Starter Packs Autopilot Packs Wireless Packs

NX2 Wind Part No. 20620042
NX2 Wind The NX2 analog Wind angle instrument displays true or apparent wind angle. Fields are clearly marked in red and green allowing for superior readbility, especially during night navigation. The scale and display is illuminated.

NX2 GPS Speed Part No. 20620035
NX2 GPS Speed The NX2 GPS Speed repeaters give easy on the eye readings of boat speed. Two scales are available: 0-16 knots for sailboats, 0-50 knots for power boats.
   


NX2 Rudder Angle Indicator Part No. 20620037
NX2 Rudder Together with Nexus Autopilot, a rudder position instrument can be used to give precise information about the rudder angle. A great benefit, for sail racing and manoeuvring in harbors.

NX2 Compass Part No. 20620031
NX2 Compass The Silva NX2 analog Compass repeater and compass heading displays have superb readability. A sensitive pointer on the 360° scale gives an accurate and stable compass heading.

NX2 Depth Part No. 20620033
NX2 Depth The Depth instrument gives an easy to read display, of the true depth in metres or feet. The logarithmic scales show shallower sections more clearly: NX2 Depth 0-600 ft

NX2 Speed Trim Part No. 20620041
NX2 Speed Trim The NX2 analog Speed Trim instrument, displays the difference in speed since last trimming. It can be operated froma Remote Control instrument, Wind Data or the Multi Center. The analog display gives you fast, accurate and easily readable information about the trends and performances of the following speeds [in %]:
  • Monitor the change in boat speed
  • Monitor the change in speed over ground
  • Monitor the change in VMG
  • Monitor the change in speed towards a waypoint
  • Monitor the change of true wind speed
  • Monitor the change ofapparent wind speed
  • Monitor the change of speed of current
  • Monitor the change of target boat speed

Target boat speed must be calculated and transmitted from a PC. The PC transmits via the NMEA to the server which in turn sends the information further to instruments on the Nexus Network.

NX2 Steer Pilot Part No. 20620040
NX2 Steer Pilot This instrument relays the NX2 server calculations to the system, enabling you to quickly and easily set an exact course to steer towards your goal. You can select from several settings:
  • Compass steering
  • Wind steering
  • Apparent wind angle for wind shifts
  • Waypoint steering
  • Bearing to waypoint (BTW)
  • Course to steer (CTS) including Set and Drift

NX2 GPS Course Part No. 20620034
NX2 GPS Course NX2 GPS Course displays heading over ground from a GPS receiver, allowing for superior readability and heading presentation. A sensitive 360° needle gives you an accurate and stable compass heading.