|
| Depth Transducer |
Part No. 20640022 |
The NX2 Depth Transducer measures the water depth. It is a rugged retractable through hull transducer in moulded glass filled polyester. Instrument settings allow you to measure from water surface or the keel.
Dimensions: 92 x 43mm (3.6 x 1.7")
Weight: 380g (13.4oz)
Cable: 8m (9.8+26.2ft)
Power supply: 12V DC (10-16V)
Current consumption: 20mA at 12V
Range: 0.8-150m (2.6-492ft) from transducer
Frequency: 200kHz
|
| 52mm Depth Transducer |
Part No. 20640009 |
Same as for the 43mm depth transducer, but for a 52mm hull aperture.
|
| "Twin Fin" Wind Transducer "Wired" |
Part No. 20640020 |
The unique "Twin Fin" sensitive and responsive wind transducer provides accurate wind speed and wind angle data to the Nexus Network. The three bladed propeller gives superior performance in light winds and the "Twin Fin" toe in the vane makes the transducer extremely stable for wind direction. Easy, snap-in attachment for mast mounting included.
|
| Wind Transducer "Wired" |
Part No. 20640021 |
Wind transducer Twin Fin Race in carbon fibre
Our unique wind transducer; the Twin Fin features a three bladed propeller and double wind vanes that are toed in to give extremely good stability in both low and high wind speeds. The three bladed propeller, unlike the more common cups design, is always 100% efficient. That, together with the optic reading technique, makes the transducer superior at low wind speeds and also provides for excellent linearity.
|
| Wireless Wind Transducer |
Part No. 20640027 |
Wireless Wind transducer including WSI-box. The twin-fin wireless wind transducer brings all the advantages of wireless instrumentation to the cruising sailor. Gone are the complications and aesthetic issues of running wiring from the top of the mast down to the chart table. Instead, the wind transducer establishes a unique pairing using radio with the WSI connection box that forms the core of the NX instrumentation system, ensuring that each transducer / server pairing is distinct from every other. The information is then fed from the WSI connection box to both the NX Sea Data and Wind Instrument.
The twin fin design makes this a highly stable and accurate wind transducer. The internal batteries are continuously charged by a small solar panel mounted on the transducer arm, have a life of around three to four years, and are easily replaced.
|
| Masthead Rotation Compensator |
Part No. 30620085 |
|
(Mast Rotation Compensation) Kit is for compensation of the mast on sailing vessels with rotating masts. The MRC is connected to the Wind Data instrument only and then the mast compensation information is sent to the Nexus Network.
|
| Bronze Tri-ducer |
Part No. 20640012 |
|
A Long Stem thru hull fitting in Bronze providing Speed, Temp and Depth to the server in one thru hull fitting.
|
| Log Transducer |
Part No. 20620011 |
The Log Transducer measures boat speed, distance and water temperature. The unique paddle wheel construction provides very accurate data at very low speeds. The retractable through hull transducer is designed for easy cleaning of paddle wheel. Dummy plug included.
Dimensions: 92 x 43mm (3.6 x 1.7")
Speed range: 0-30kts (km, mph)
Weight: 320g (11.3oz)
Temp. measure range: 23° to + 104°F
Cable: 8m (26.2ft)
Power supply: 12V DC (10-16V)
Accuracy (speed): +/- 1%
Current consumption: 20mA at 12V
|
| 52mm Log/Speed Transducer |
Part No. 20640019 |
The Log transducer is available in two dimensions, 43mm and 52mm diameter. The 52mm transducer has a built in lock valve to prevent water leakage when cleaning the paddle wheel.
|
| Triducer |
Part No. 20620058 |
NX Triducer for Speed, Depth and Temperature
The latest in thru-hull transducers, the Triducer requires only a single aperture in the hull to collect three separate sets of data; speed, depth and water temperature. A dummy plug is supplied for fitting when not used for long periods.
|
| GPS Antenna |
Part No. 20640010 |
The compact and water resistant GPS antenna/receiver, is suitable for a wide range of applications. It can be mounted directly on the deck, on a pulpit or on a mast using standard mounts. It can be connected directly to NMEA compatible navigation equipment, such as GPS Navigator
Dimensions: 108 x 49mm (4.2 x 1.9")
Weight: 200g (7oz)
Transducer cable: 10m (32.8ft)
Power supply: 12V DC (10-16V)
Current consumption: 100mA
Communication out: NMEA 0183
Receiver: 12 channel parallel
Antenna: Ceramic patch
Position accuracy: Less than 25m 95% of the time
|
| Mast Brackets |
Part No. 30620015 |
Fits all NX2 instruments in 113 x 113 mm (4.3" X 4.3" inches) size, for surface mounting:
30620015 - One instrument bracket
30620014 - Two Instrument brackets
30620016 - Three Instrument brackets
Instrument brackets for Sailing vessels and mast mounting. Two and Three available in Carbon Fibre.
|
| Connection Box |
Part No. 30620031 |
Use this connection box for smoother installation of the Nexus Network. It is great for coordinating the use of numerous connections at a single access point.
|
| Instrument Panels |
Part No. 30620001 |
Part No. 30620002 |
|
Detachable instrument panels in anodized aluminum, designed for mounting on standard 1" (25.4mm) rails, roof mounted or bulkhead mount. These panels are designed to fit all NX2 instruments of 110mm (4.3") height. Available in two lengths:
|
Instrument panel 405mm (15.9") without predrilled holes (Weight 830g, 29.3oz)
|
Instrument panel 590mm (23.2") without predrilled holes (Weight 1140g, 40.2oz)
|
*Note: Transducers will work with NX2 or CLASSIC NEXUS, except for 85023, which works with NX2 only.
|
Low weight fluid damped compass in compact size allows mounting in cramped areas. It can be flush (surface) mounted. The compass is auto-deviated from the Multi Control instrument.